SHR-4160N/P USER’S MANUAL

4Connecting USB Device

1.A total of 2 USB connecting terminals are placed in front of and behind SHR4160N/P each.

2.Connect USB HDD, USB CD/DVD, and USB Memory through the ports in front and behind SHR-4160N/P respectively.

3.Only one USB device can be assigned to each USB connection port.

4.To recognize/ignore USB HDD, follow the procedure of Menu - System - HDD Setup upon connecting.

5.Supply the HOT PLUG function to connect/disconnect the USB device.

6.To recognize/ignore the HOT PLUG function, press Connect/Disconnect from Menu

-System - HDD Setup.

Note

Refer to User’s Manual 5-8, SYSTEM(HDD Setup).

Caution

-After enough time is given to the stabilization of the USB device connected by HOT PLUG, press Connect from SHR-4160N/P Menu.

-To disconnect the USB device, be sure to click Disconnect from SHR-4160N/P Menu. Otherwise, the USB device may be in trouble.

-Available to use with connecting the same kinds of USB device to the USB terminal on the front and back of SHR-4160N/P.

(For example, 2 CD-RW or 2 USB memories can be connected to the front and back of SHR-4160N/P.)

-If the USB memory is used, it should be set to the format supported by SHR-4160N/P. Although it is formatted with FAT32 in the PC, it is re-for- matted when it is connected to SHR-4160N/P.

Caution

- The USB device HDD shall be set to Master.

3-5