Samsung SHR-4160P/TRK manual 10-46

●Sequence Time

-As long as you are connected to SHR-4160N/P in Monitoring Mode while Screen change is dominant, this sets up Screen change Time. The scope of setup ranges from 5 to 30seconds.

●OSD Display

-Determines if OSD shall be displayed on each channel of Smart Viewer.

-Whether you check “Enable” or not, OSD will appear or not. However, Audio icon, PTZ icon, REC icon, and Alarm/Motion event icon will not be affected by the OSD Display condition.

●Callback Connection

-Selects the port to allow the connection of Callback.

●Auto Connection

-Determines if Smart Viewer shall be automatically connected to SHR-4160N/P or Site as soon as it starts running.

-If you check “Auto Connection On”, the name of SHR-4160N/P and Sites that are currently registered in DVR/Site List will be listed as follows and if you select one, it will be automatically connected to the selected SHR-4160N/P or Site as soon as Smart Viewer starts running.

10-46