Samsung SHR-5042P/XEG Time/Date/Language Setup, Password,  DST Daylight Saving Time,  Date Type

Time/Date/Language Setup

Date/Time/Language Setup

Time Setup	2007-04-03 05:12:46
Date Type	YYYY - mm - dd
Time Type	24
Language	English

	OK	Cancel
Move/Control	Select	Exit

Time Setup

The following screen appears if the Enter( ) button is pressed.

(GMT) Greenwich Mean Time : D

	Year	Month Day			Hour		Min	Sec
	2007	4	3		6	5		10
DST	Month	Week	Weekly	Hour	Month	Week	Weekday	Hour
OFF	1	1st	SUN	0	~ 1	2st	SUN	0
						OK	Cancel
	Move/Control				Select			Exit

Select the standard time zone suitable to the corresponding region.

To change the date and time, move the cursor to

the corresponding item and press the Enter( ) button. Then, change the day/month/year or second/

minute/hour using the  or  buttons. Escape from the change mode by pressing the Enter( ) button again.

When the time is changed, the date and time will be halted until “OK” or “Cancel” is pressed.

	 If the date and time are changed to
Caution	earlier values, the data written prior
	to the change may be deleted. For
	example when the 8 o’clock in the
	morning is changed to the 7 o’clock in
	the morning, the data written between 7
	and 8 in the morning will be deleted.

DST (Daylight Saving Time)

DST sets the clock one hour ahead the local standard time. This setting enables the system to display the time adjusted for DST. If the date set for DST comes, the system time runs one hour faster.

If the DST is set to “OFF”, it will not be applied. It is impossible to enter the date menu on the right. When you set the DST to “ON”, designate the start time on the left and the end time on the right while basing on the “~” mark.

Date Type

It supports a total of 9 formats (such as Year-Month- Day / Day-Month-Year / Month-Day-Year).

Time Type

It supports two formats of 24 hours / 12 hours (AM/ PM).

Language

After selecting a language, OSD is displayed in the selected language. The available languages are displayed in the list.

Password

User Manager - Password

Old Password	****
New Password	****
Confirm Password	****

Record Lock

	OK	Cancel
Move/Control	Select	Exit

Old Password

The default password was not designated. Use it when changing the password.

New Password

A virtual keyboard will appear if the Enter( ) button is pressed. You can input characters one by one up to 16 characters.

Confirm Password

This is the menu for confirming a newly changed password. You need to enter “New Password” first. If you enter the “Confirm Password” first without entering the “New Password”, no response is made on the entry.

Record Lock

If the Record Lock is set to On, a pop-up window, asking for the password appears while disabling the recording.

05 MENU SETUP

menu setup _21