Operating Your Camera
COLOR CCD CAMERA User’s Manual
35
COLOR CCD CAMERA User’s Manual
34
PRIVACY :Hide an area you want to hide on the
screen.
When the SPECIAL menu screen is displayed,
press the Up and Down buttons so that the
arrow indicates ‘PRIVACY’.
Set up the mode using the 4 direction buttons.
Set up the mode using the 4 direction buttons.
When the SPECIAL menu screen is displayed, press the Up and Down buttons
so that the arrow indicates MOTION DET .
- SENSITIVITY : You can select up to 8 MD areas.When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is
sequentially selected as brown, orange, blue, cyan, yellowish green, yellow
and red.
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
Enter a title, move the cursor to ’POS’ and press the SET button. The entered
title appears on the screen. Select the position to display the title on the
screen by using the 4 direction buttons and press the SET button. When the
position is determined, select ’END’ and press the SET button to return to the
SPECIAL menu.
•
MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the
monitor screen.
•
When motion is detected, “MOTION DETECTION” expression is displayed on the screen.
Notes
MOTION DET : If you connect an alarm device to
this camera, you can monitor
activity more efficiently, because a
signal is generated by the camera
whenever motion is detected.
- AREA SEL : You can select up to 8 MD areas.
- AREA MODE : Determines whether to use the area
selected in the AREA SEL, and the size
and position of the area.
to Locate, then SETto Locate, then SET
FRONT DOOR
-
MASK COLOR :Determine area color. You can select Gray, Green, Red, Blue, Black, White.
- TRANSP : Determine the transparency of selected area as controlling number from 0 to 3.
- RETURN : Select this to save the PRIVACY menu settings and return to the
SPECIAL menu.
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
•
The chance of resolution decrease is existed because DIS function uses the digital zoom.
•
DIS doesn’t operate when background illumination is too low.
•
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
Notes