Operating Your Camera
•Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button.
• Please press the SETUP button to save the changes and complete the setting.
Notes
• There is no ‘MD’ output signal. ‘MD’ is on screen display only words.
PRIVACY : Mask privacy area you do not wish to appear on the screen.
-OFF : Cancels the PRIVACY mode.
-ON : Operates the PRIVACY mode.
• Please press the SETUP button.
• Please select the area you do not wish to appear from the 4 areas in AREA SEL mode.
• Please select ON mode for the chosen area.
• Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or RIGHT button.
COM ADJ :
When wish to control CAMERA by external communication control device, it is function that set up CAMERA's communication states and protocol.
• CAM ID | : Assign ID number to the camera. It is restricted available to set |
| ID from 1~255 |
•DISP CAMID : Displays CAM ID on the top left of the screen.
•BAUD RATE : Configure baud rate from 9600bps, 19200bps, 38400bps, 57600bps.
•UART MODE: Configure parity bit to NONE,EVEN, or ODD. Data bit is set to 8bit and stop bit to 1bit.
•END
Notes
•Please set CAM ID of CAMERA and external communication control device equally.
IMAGE ADJ : Includes image quality or special function factors.
• MIRROR : Sets a horizontal image inversionj.
MIRROR ON | MIRROR OFF |
COLOR IR CAMERA 36 User’s Manual | COLOR IR CAMERA 37 User’s Manual |
