CLEANING THE WATER DISPENSER

Cup Support / Dispenser Tray

1

Cup support/Dispenser tray

Press “PUSH” behind the cup support slightly, then

 

 

remove the cup support.

2

Using the dispenser tray handle, remove the tray.

3

Empty the water in the dispenser tray, then clean it using

warm water and detergent.

 

Connection path

Wipe out the connection path and surrounding area with a clean damp cloth.

Dispenser tray

Cup support

Water Tank / Supply Device

1

2

3

Pull upward and disassemble the hooks on both sides of the large-sized cap.

Loosen the water supply device by turning it in the direction of the arrow and removing it.

Wipe the large-sized cap and the exclusive water tank with warm water and detergent.

•Hold the cap and pull it upwards to remove it. Clean the cap and waste filtering bottle attached to the cap with a soft brush.

4

Caution

After cleaning the water supply device with a soft brush, press the water supply device operation lever, then wash it in running water.

•Clean the water tank frequently if it used to dispense tea or other such beverages. Only use filtered tea. For better hygiene, beverages with a high sugar content (juice, soft drinks) are not recommended.

•Deposits can be cleaned by wiping the tank with a cloth dampened in vinegar or salt water.

•Check that the rubber seal on the water supply device has not slipped off or is not damaged by a sharp-edged object. Otherwise, it may leak.

14