036
Ê Selecting the self-timer
1.
Select a Recording mode with the
exception of Voice recording mode.(p.21)
2.
Press the Self-timer / Right
( )
button until the desired mode indicator
displays on the LCD monitor. A 10 second,
2 second, Double self-timer or Motion timer
icon appears on the LCD monitor.
3. When you press the shutter button, the
picture will be taken after the specied
time has elapsed.
Self-timer ( ) / Right button
[Selecting the 10 SEC
self-timer]
Ê Self-timer mode indicator
Icon Mode Description
10 Sec
self-timer
Pressing the shutter button will allow an interval of
10 seconds before the image is taken.
2 Sec
self-timer
Pressing the shutter button will allow an interval of
2 seconds before the image is taken.
Double
self-timer
A picture will be taken after about 10 seconds and
2 seconds later a second picture will be taken.
When using the ash, the 2-second
self-timer may be delayed for longer than 2 sec-
onds depending on the ash charging time.
Motion
Timer
The camera detects the subject's movement 6
seconds after pressing the Shutter button, and the
picture is taken when the movement is stopped.
Ê The Motion Timer ows are as followings. (Movie mode excluded)
Selecting the Motion Timer à Pressing the Shutter button Ã
Conrming the composition (Within 6 sec.)
*1
à Starting the detec-
tion (Swing your hands fully)
*2
à Stopping the detection
(Do not move) Ã Taking an image (after 2 sec.)
*1: The camera detects the subject's movement 6 seconds after pressing the
Shtter button, so conrm the composition within 6 seconds.
*2: Move your body or hands fully.
Ê Motion Timer
Motion Icon & Self-timer lamp
Pressing the Shuter button after
setting the Motion Timer Blink (1 second interval)
Detecting the subject's movement Blink (0.25 second interval)
No movement is detected Turn on and the image is taken
after 2 seconds
In the following cases, the Motion Timer may not operate.
å The focus distance is over 3m.
å The exposure is too bright or too dark.
å In backlight conditions.
å The movement is insignicant.
å The movement is detected
beyond the center part (50%) of
the sensor where the movement
is recognized.
å If the camera doesn't sense any
movement for 30 seconds, or the
camera doesn’t sense stillness
after sensing movement.
The detection range of
Motion Timer