021

Starting the Recording mode
Starting the Recording mode
How to use the Program mode
How to use the Program mode

Selecting the automatic mode will confi gure the camera with optimal

settings and you can manually confi gure various functions.

1.
Select the Program mode by using the
mode dial. (p.20)
2.
and compose the image by using the
LCD monitor.
3.
Press the
Shutter
button to capture an
image.
Refer to page 37-42 for more information about the Program mode
menus.
How to use the DIS(Digital Image Stabilization) mode
How to use the DIS(Digital Image Stabilization) mode

This mode will reduce the effect of camera shake and help you get a well

exposed image in dim conditions.

1.
Select the DIS mode by using the
mode dial. (p.20)
2.
and compose the image by using the
LCD monitor.
3.
Press the
Shutter
button to capture an
image.
Things to watch out for using the DIS mode
– The digital zoom will not operate in the DIS mode.
– If the lighting conditions are brighter than fl uorescent lighting conditions,
the DIS will not activate.
– If the lighting conditions are darker than in fl uorescent lighting
conditions, camera shake warning indicator (
) will be displayed. For
best results only take pictures in situations where the camera shake
warning indicator (
) is not displayed.
– If the subject is moving, the captured image may be blurred.
– For best results, avoid moving the camera while the [Capturing]
message is displayed.
– As the DIS uses the camera’s digital signal processor, it may take a little
longer for the camera to process and save the images.
– If the image size is (
) or (
) ,the DIS mode can’t be selected.
00010
01:00 PM
2008/01/01
00010
01:00 PM
2008/01/01