8. Camera Setup
Touch the <Setup> icon to configure a camera to be monitored.
General setting
1.Touch <General setting>.
2.Configure the basic camera settings.
•• Camera Name : Camera name is used to easily identify the camera when you have more than one. i.e., Living room, Kitchen, Bedroom.
•• Event Alarm : Specify whether to trigger the alarm or not, and specify the sensitivity.
The higher the sensitivity is, the subtler motion/audio events will be detected.
•• Night Vision : Set the IR lighting.
Check <Night Vision> to set the camera to switch to the night vision mode automatically.
•• Audio : Adjust the volume of the
3.Configure the notification.
•• Push Notification : Notifies alarm events.
•• YouTube : Creates 30 seconds long footage and uploads onto the user’s YouTube account.
•• Picasa : Sends event images to the user’s Picasa account.
4.Touch <Apply>.
Network setting
1.Touch the <Network setting>.
2.Configure the wireless network.
••
•• Other WiFi Networks : Enter the SSID name and password to connect to the network. If selected, it shows guide on SSID and networking procedures.
MM`` For further details, please refer to the user’s manual.
Time setting
1.Touch <Time setting>.
2.Set the camera’s clock.
•• Time Zone : Select your region.
•• Summer Time : Check this option if you live in a country or region where DST(Daylight Saving Time) is applied.
9. Auto Login Setup
1.Move to the <Setup> item.
2.Check <Auto Login> to login automatically from the next application running.
10. Info.
1. | Move to the <Info.> item. |
|
2. | Shows the information on | vX.XX |
| Samsung Techwin Smartcam | |
| Application. | XXXX, XX, XX |
|
| |
|
|
|