1-5) External terminal connecting method for CAMERA and

MONITOR

1) External terminal connecting method for CAMERA

An additional PIR sensor or external sensor can also be connected.

The additional PIR sensor can be connected as shown in the above graphic.

Sensor’s trigger signal is NO (Normal Open).

Sensor is not supplied. (Sold separately)

2) VIDEO OUT BNC (1~4) terminals connecting method of monitor rear

VIDEO OUT BNC1 ~ BNC4 terminals in the rear of the monitor are VIDEO terminals for outputting video images from OBSEVATION CAMERA to THROUGH OUT.

BNC VIDEO output terminal can be used to connect to VCR (TIME LAPSE) or SLAVE MONITOR.

3) VCR or ALARM terminal connecting method

 

VIDEO IN

VIDEO OUT

TIME LAPSE VCR

AUDIO IN

AUDIO OUT

OR NORMAL VCR

 

TRIGGER OUT

TRIGGER

 

VIDEO OUT

VIDEO IN

 

AUDIO OUT

AUDIO IN

a)Connect the 6-pin plug to the VCR terminal on the real panel.

b)Connect the VIDEO OUT plug to the VIDEO IN terminal of the VCR.

c)Connect the VIDEO IN plug to the VIDEO OUT terminal of the VCR.

d)Connect the AUDIO OUT plug to the AUDIO IN terminal of the VCR.

e)Connect the AUDIO IN plug to the AUDIO OUT terminal of the VCR.

27