1-4) CAMERA Composition and Connecting Method to

MONITOR

After positioning monitor and installing four cameras to a desired location, please connect CAMERA to MONITOR through CAMERA CABLE (MCB-60) as shown in the below figure. Please check whether or not it is properly connected.

Connection status checking method :

Turn on the monitor after connecting cameras, and check if camera image is displayed. The initial screen mode of monitor is quad mode.

In case monitor and camera is not connected, OSD ‘L’(LOSS) will be displayed on blue screen.

English-26

Page 26
Image 26
Samsung SMO-120P manual Camera Composition and Connecting Method to, Monitor, English-26, Connection status checking method