K.TALK

Communicates with the doorbell in duplex mode.

L.Number Key(0 ~ 9)

KPress the number of the channel to watch it in full screen mode.

Or, press the SYSTEM ID button and then press the number of the system you want to control with the remote

Lcontrol.

M.AUX CONTROL

Outputs relay pulses to an external device for a specified

Mtime.

You can adjust this control according to your environment. (For example, when the doorbell rings, you can move to the corresponding camera and identify the visitor before opening the door using the AUX CONTROL button.)

N. ZOOM(TELE/WIDE)

NOnly the remote control has this button. It is available only when a camera (SOC-420(P), SOC-920(P) sold separately) is connected to the system.

O.SET

Enters the selected Sub Menu from the Main Menu.

OP. ZOOM

 

When pressed in full screen mode, the screen is enlarged.

 

Each press of this button enlarges the screen two and four

P

times sequentially and then returns to the normal size.

Use the Rotary Wheel to move the Zoomed-in screen.

 

Q

Q. FREEZE

R

Captures the selected screen as a still screen.

 

S

R.SYSTEM ID

Selects the system to control with the remote.

Only the remote control has this button. With system ID button pressed, enter the desired number by pressing the corresponding button (0 to 9) to set up the Remote Control ID.

S.ID RESET

Located on the remote control, this button resets the selected System ID to the default ID (1).

Note: For detailed function, see the MUX Box instruction provided.

Eng-13