installation & connection

4.Use the provided screws (x3) to fi x the bracket to a desired position (ceiling or wall).

Ensure that the <CAMERA FRONT> label on the bracket faces the direction for camera monitoring.

Upper Lid

5.Arrange the cables through the bracket to the ceiling or wall.

Press hard the upper lid down to remove it before you can arrange the cables through to the ceiling.

If you do not intend to install the camera on the ceiling, use the opposite empty area to the <CAMERA FRONT> label side for the wiring.

6.Mount the main unit onto the bracket.

Align the marking hole of the main unit with the <CAMERA FRONT> label of the bracket, and turn the unit in the <LOCK> direction.

7.Adjust the lens in a desired direction.

For adjusting the lens direction, refer to "Adjusting the monitoring direction for the camera".

8.Secure the inner cover to the main unit.

Fit the two holes of the wing-side locks on the inner cover into the corresponding hole of the main unit, and press it down until you hear a click.

9.Fix the cover to the main unit.

Fit the protruding part inside the cover into the corresponding hole of the main unit, and turn the cover to fi x it.

18_ installation & connection

Page 18
Image 18
Samsung SNC-B5368P user manual Installation & connection