8. Camera Setup
Tap the <Setup> icon to configure a camera to be monitored.
General setting
1.Tap <General setting>.
2.Configure the basic camera settings.
•• Camera Name : Camera name is used to easily identify the camera when you have more than one. i.e., Living room, Kitchen, Bedroom.
•• Event Alarm : Specify whether to trigger the alarm or not, and specify the sensitivity.
The higher the sensitivity is, the
subtler motion/audio events will be detected.
•• Night Vision : Set the IR lighting.
Enable <Night Vision> for the camera to switch automatically to night vision mode.
•• Audio : Adjust the volume of the
3.Configure the notification.
•• Push Notification : Notifies alarm events.
•• YouTube : Creates 30 seconds long footage and uploads onto the user’s YouTube account.
•• Picasa : Sends event images to the user’s Picasa account.
4.Tap <Apply>.
Network setting
1.Tap the <Network setting>.
2.Configure the wireless network.
•• WiFi : Shows the list of available access points.
•• Other WiFi Networks : Enter the SSID name and password to connect to the network.
If selected, it shows guide on SSID and networking procedures.
MM`` The camera LED will change from flashing blue to solid green within 30 seconds. This confirms the camera is connected to your WiFi network. You can now unplug the
camera and place the camera anywhere within your wireless network range. If the camera LED did not change to solid green, please contact our tech support.
Time setting
1.Tap <Time setting>.
2.Set the camera’s clock.
•• Time Zone : Select your region.
•• Summer Time : Check this option if you live in a country or region where DST(Daylight Saving Time) is applied.
9.Auto Login Setup
1.Move to the <Setup> item.
2.Enable <Auto Login> to login automatically from the next application running.
10.Info.
1. | Move to the <Info.> item. |
|
2. | Shows the information on | vX.XX |
| Samsung Techwin Smartcam | XXXX.X.XX. |
| Application. |
|
|
|
|
