LNA (Low Noise Amplifier)
When a weak broadcast signal causes unclear noisy picture the “LNA” feature improves the picture quality by setting to “On”. If you experience noise on a certain channel, set the “LNA” to “On” or “Off” for this channel, to obtain the optimum picture.
1 Press the MENU button. Press the … or † button to select “Channel”, then press the ENTER button.
2 Press the … or † button to select “LNA”, then press the ENTER button.
3 Press the … or † button to select “On” or “Off”, then press the ENTER button.
Press the EXIT button to exit.
Channel
Input | Antenna | : Ant.1 | √ | |
| Air/Cable | : Air | √ | |
Picture | Auto Program |
| √ | |
| Add/Delete |
| √ | |
Sound | Favorite Channels | √ | ||
| Name |
| √ | |
Channel | Fine Tune |
| √ | |
Setup | ▼ More |
|
| |
Move | Enter | Return | ||
| ||||
Channel
Input | ▲ More |
|
|
| LNA | : Off | √ |
Picture | Scan |
| √ |
Sound |
|
|
|
Channel |
|
|
|
Setup | Move | Enter | Return |
|
| Channel |
| |
Input | ▲ More |
|
|
| LNA | Off |
|
Picture | Scan | On |
|
Sound |
|
|
|
Channel |
|
|
|
Setup | Move | Enter | Return |
| |||
NOTE
•This function works in “ANT 1 IN” mode only (not available in “ANT 2 IN” mode).
