Samsung SP-50L7HR, SP-56L7HR

English - 94

Appendix

• For replacement, you will need a 5.91 Inches-long Phillips screwdriver and a pair of gloves.

NOTES

•Be sure the replacement Lamp is the same type.

•After replacing the lamp, align the lamp cover with the groove and secure the screws.

•The TV will not turn on if the lamp cover is not correctly closed (as this will activate the

protective circuit).

1Unplug TV, then remove the 7

screws.

2Remove the rear cover.

3Remove the 2 press-pin

screws the Lamp.

4Separate the Lamp from the

engine by holding the handle

and pulling it out.

5To reinstall the Lamp, follow

these steps in reverse order.

Contents

Main Table of Contents Page Page Page List of Features Accessories Front Panel Buttons Front Panel Information Window When these indicators appear, there is a possible problem with the TV. Rear Panel Jacks Remote Control Installing Batteries in the Remote Control 2 1 3 Page Page Connecting VHF and UHF Antennas 1 Antennas with 300-ohm Flat Twin Leads 2 Antennas with 75-ohm Round Leads Page Connecting Cable TV and VCR 1 Cable without a Cable Box 2 1 Cable with a Cable Box that Descrambles All Channels Connecting a Cable Converter Box Connecting a Cable Converter Box and a VCR Connecting a Camcorder 2 3 Connecting a DVD Player 1 Connecting to Y,PB,PR 2 1 2 Connecting to Audio and Video Jacks Connecting a DTV Set-Top Box 2 Connecting to Y,PB,PR 2 Connecting to DVI (Digital Visual Interface) Connecting to R,G,B 2 Connecting to HDMI (High Definition Multimedia Interface) 1 Page Page Viewing the Menus 3 Viewing the Display Turning the TV On and Off Viewing the Menus and On-Screen Displays Selecting the Menu Language 1 Selecting the Antenna Input 2 Memorizing the Channels Selecting the Video Signal Source Storing Channels in Memory (Automatic Method) 2 Adding and Erasing Channels 1 Changing Channels Using the Channel Buttons Using the Number Buttons Using the Previous Channel Selecting Your Favorite Channels To Store Your Favorite Channels: To View Your Favorite Channels: Scanning the Channels Labeling the Channels 3 Picture Control Customizing the Picture Resetting the Picture Settings to the Factory Defaults 4 Using Automatic Picture Settings 1 2 3 Sound Control Adjusting the Volume Using the MUTE Button Customizing the Sound 3 Using Automatic Sound Settings 2 1 Setting the Clock 3 Auto Power Off Setting the Timers 1 Setting the On/Off Timer 5 4 3 Setting the Sleep Timer Viewing an External Signal Source Setting the Signal Source Assigning Names to External Input Mode Page Page Page Customizing Your Remote Control Setting Up Your Remote Control to Operate Your VCR (Cable box or DVD player) 1 2 3 4 6 5 Page Fine Tuning Channels 1 4 LNA (Low Noise Amplifier) Selecting the Color Tone select Color Tone, then Not available in the Cinema picture mode. select Cool2, Cool1, Normal, Warm1 or Warm2, then press the Changing the Picture Size 2 Digital Noise Reduction select Digital NR, then select Off or On, then DNIeTM (Digital Natural Image engine) Setting the My Color Control Mode 2 Using the Easy Control Menu 3 Custom Settings Resetting the Colors to the Factory Defaults 4 Setting the Film Mode Film mode is supported in 480i mode only. select Film Mode, then select Off or On, then Viewing Picture-In-Picture 3 Activating the PIP Selecting an External Source Swapping the Sub Picture and Main Picture select PIP, then press the select Swap, then press The sub picture appears in the main picture, and vice versa. Swap does not work in ANT 2 IN, Component1, Component2, PC, DVI and HDMI modes. Changing the Size of the Sub Picture Changing the Location of the Sub Picture select PIP, then press the select Position, then press select a position you want, then press the ENTER button. PIP Changing the Channel of the Sub Picture Selecting the Sound Source Setting the SRS TSXT Choosing a Multi-Channel Sound (MTS) track Auto Volume Enjoying the Sound of External Speakers Using the V-Chip 3 How to Change Your Password 4 How to Enable/Disable the Rating Controls 3 How to Set up Restrictions Using the TV Parental Guidelines 2 3 4 How to Set up Restrictions Using the MPAA Rating 1 2 4 3 Important Notes About Parental Locks TV (FCC) Age-Based Ratings TV (FCC) Content Category MPAA Rating System (Movies) How to Set up Restrictions Using the Canadian English 3 4 2 How to Set up Restrictions Using the Canadian French 3 4 Viewing Closed Caption Information 4 5 6 Setting the Blue Screen Mode select Setup, then press select Blue Screen, then select On or Off, then Setting The On/Off Melody A melody sound can be set to come on when the TV is powered On or Off. select Setup, then press the select Melody, then press select On, then press the 3 Page Using Your TV as a Computer (PC) Display How to Connect Your PC to the TV Setting up Your PC Software (Based on Windows 98) Display Modes Adjusting the Picture Quality 5 Changing the Picture Position 5 After connecting the TV to your PC, adjust the position of picture if it is not well-aligned. select Setup, then press the select PC, then press the select Position, then press Adjusting the Picture Quality and Position Automatically Initializing the Picture Settings Changing the Picture Size (PC Mode) 3 Page Page Troubleshooting Appendix Possible Solution Problem Replacing the Lamp Page Cleaning and Maintaining Your TV Placement Liquids Cabinet Temperature