➢
English - 26
Customizing the Picture Settings
Contrast 80
Mode :Standard
Size : 16:9
Digital NR : On
DNIe Demo : Off
My Colour Control
Film Mode : O ff
PIP
Picture
TV
Move Enter Return
Mode :Custom
Contrast 80
Brightness 50
Sharpness 50
Colour 50
Tint G 50 R 50
Colour Tone : Cool 1
Reset
Mode
TV
Move Enter Return
Mode :Custom
Contrast 80
Brightness 50
Sharpness 50
Colour 50
Tint G 50 R 50
Colour Tone : Cool 1
Reset
Mode
TV
Move Enter Return
Cool 2
Cool 1
Normal
Warm 1
Warm 2
Mode :Custom
Contrast 80
Brightness 50
Sharpness 50
Colour 50
Tint G 50 R 50
Colour Tone : Cool 1
Reset
Mode
TV
Move Enter Return
Your television has several setting options that allow you to control
the picture quality.
1Press the MENU ()button.
Result:The main menu is displayed.
2Press the …or †button to select Picture.
Result:
The
Picture menu is displayed.
3Press the ENTER () button.
Result:
The
Mode is selected.
4Press the ENTER () button again.
Result:
The
Mode menu is displayed.
5Press the ENTER () button.
Result:The following
options
are available.
Dynamic - Standard - Movie - Custom
6Select the required option by pressing the …or †button.
7Press the ENTER () button.
8Select the required option by pressing the …or †button.
Result:The following
options
are available.
◆Contrast - Brightness - Sharpness - Colour -
Tint (NTSC only)
◆Contrast - Brightness : PC mode.
9Press the ENTER () button.
Result:The horizontal bar is displayed.
Press the œor √button until you reach the optimal
setting.
➢◆Press the …or †button to select other option(s).
◆The settings values may vary depending on the input
source. (ex. RF, Video, Component, PC, or HDMI.)
10 Press the MENU () button to return to Mode menu.
Press the …or †button to select Colour Tone.
Press the ENTER () button.
11 Select the required option by pressing the …or †button.
Result:The following
options
are available.
Cool 2 - Cool 1 - Normal - Warm 1 - Warm 2
12 Press the ENTER () button.
13 To return the factory defaults, select Reset by pressing the
…or † button. Press the ENTER () button.
Result:The previously adjusted settings will be reset to the
factory defaults.
➢The reset function is set for each mode (Dynamic,
Standard, Movie, or Custom).
➢The reset function is also set for each Colour Tone (Cool 2,
Cool 1, Normal, Warm 1, or Warm 2).
14 Press the EXIT button to exit.
BP68-00564A-00Eng 11/24/05 10:57 AM Page 26