English - 43
Selecting the Sound Mode(depending on the model)The DUAL I-II button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either “DUAL-I” or “Stereo”, depending on
the current transmission.
➢◆If the receiving conditions deteriorate, listening will be
easier if the mode is set to Mono.
◆If the stereo signal is weak and automatic switching
occurs, switch to Mono.
◆When receiving mono sound in AV mode, connect to the
AUDIO-L input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the DUAL I-II button.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM stereo
NICAM DUAL-I/II
Regular broadcast
(Standard audio)
Bilingual or DUAL-I/II
Stereo
On-screen indication
Mono (Normal use)
NICAM Mono
↔
Mono
NICAM stereo
↔
Mono
(Forced mono)
Mono
DUAL-I
↔
DUAL-II
Stereo
↔
Mono
(Forced mono)
NICAM DUAL-I
→
NICAM DUAL-II
→
Mono
NICAM
Stereo
A2
Stereo
BP68-00564A-00Eng 11/24/05 10:58 AM Page 43