SPEED DOME CAMERA User’s Manual
56
SPEED DOME CAMERA User’s Manual
57
PTZ Trace
①Trace 1
②Trace 2
③Trace 3
④Trace 4
PTZ Trace 1
Replay
Memorize
Sequence Setting
①Preset
②Swing SEQ
③Group SEQ
④Tour SEQ
⑤PTZ Trace
⑥Auto Run
Power On Resume ON
MD Dwell Time OFF
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
➡
➡
14. PTZ Trace▶Main Menu/Sequence Setting/PTZ Trace
Maximum 4 patterns of the manual operation paths (for Pan,
Tilt, Zoom and Focus) are memorized and replayed.
Replay :
Replays a route saved by the Trace function. Use the Stop
button to stop the replay.
Memorize :
Up to 120 seconds of a memory can be saved. The memory
duration varies depending on the difficulty level of the PTZ
Trace action. If the memory capacity is full, the Over
message appears and the memorization action is
terminated.
Functional Description Functional Description
Auto Run
Mode OFF
Time 30 SEC
Sequence Setting
①Preset
②Swing SEQ
③Group SEQ
④Tour SEQ
⑤PTZ Trace
⑥Auto Run
Power On Resume ON
MD Dwell Time OFF
Main Menu
①Camera Setting
②Sequence Setting
③P/T Setting
④OSD Setting
⑤Alarm Setting
⑥Initialize
Status
➡
➡
15. Auto Run▶Main Menu/Sequence Setting/Auto Run
If there is no controller operation by the user for a certain time,
the sequence operation designated by the user will be
executed.
Mode :
- Home : Auto run Home Position (Refet to the Preset
Menu.)
- Preset : Auto run a selected preset number.
- Swing : Auto run a selected Swing mode.
- Group : Auto run a selected Group mode.
- Tour : Auto run a selected Tour mode.
- Trace : Auto run a selected trace mode.
- A.Pan : Auto run a 360-degree pan. To activate the
panning command, you need to set up the
camera's tilt angle and auto pan speed manually.
Time :
Enables setting up an Auto Run duration. (The duration can
be 1~60 seconds, or 1~60 minutes.)