Caution on Lamp Use and Replacement

Projector Lamp

■The Projector lamp changes in nature depending on time of use and using environment. Refer to the installation and other recommended operational sections of the user’s manual to avoid rapid degradation of performance and deterioration of picture quality. The projector lamp requires regular replacement.

■Free servicing will be offered within 90 days after purchasing of the product and within 300 hours of product use, if the problem is due to a defective lamp.

■You can check the lamp use time by pressing the INFO button on the remote control.

Caution on Lamp Replacement

■Unplug the power cord before replacing the lamp.

■Inside of the projector is very hot. Cool off the projector for at least an hour after turning off.

■Contact your dealer to purchase a lamp for replacement. (Ultra violets from the lamp can damage your eyes.)

■Turn off the power of the lamp before replacement or repair. (Due to the high-pressure of the lamp, it is possible to explode.)

■When the lamp is broken, be careful not to be hurt by glass pieces. Refer to the manual for proper handling.

Caution on Lamp Use

■This projector produces intense light. Do not stare light source directly.

■Do not touch the exhaust vent during operation. It can be very hot.

■Do not expose the unit to rain or moisture.

Preparation

Replacement and Use Lamp on Caution

5