Samsung SPL250WVX/ZN, SPL250WX/EN, SPL200WVX/EN manual Timing signal, Color Temperature Offset Gain

Timing signal.

2)Contrast : Used to adjust the contrast between the object and the background.

3)Brightness : Used to adjust brightness of the entire picture.

4)Sharpness : Used to adjust the sharpness of the picture.

▶When the input signal is PC Timing, the Sharpness cannot be adjusted.

5)Color : Used to adjust color lighter or darker.

▶When the input signal is PC Timing, the Color cannot be adjusted.

6)Tint : Used to obtain more natural color of objects using Green or Red enhancement.

▶When the input signal is PC Timing and PAL and SECAM of the

[S-Video] and [AV] modes, the color cannot be adjusted.

7)Color Temperature : You can select the color temperature according to your preferences.

-Factory defaults: 5500K, 6500K, 8000K, 9300K

-You can select the color temperature for the items below according to your preferences.

R-Gain, G-Gain, B-Gain : Adjusts the color temperature of the White level.

R-Offset, G-Offset, B-Offset : Adjusts the color temperature of the Black level.

1)	Color Temperature	5) R-Offset
2)	R-Gain	6)	G-Offset
3)	G-Gain	7)	B-Offset

4)B-Gain

8)Gamma : Changes the brightness characteristic for each color tone of an image.

-The larger (+) the value, the greater the contrast of the bright and dark parts; the smaller (-) the value, the darker the dark parts.

-Adjustable range: -3 to +3

Contrast

Brightness

Sharpness

Color

Tint

Color

Temperature

R-Gain

G-Gain

B-Gain

R-Offset

G-Offset

B-Offset

Gamma

9)Save :You can save the status of a screen you adjusted according to your preferences using the Mode > User OSD.

Save

10) Reset : Restores the mode settings to the factory defaults.

Reset

Size	You can select a screen size according to the type of scene.
	▶ When the input signal is PC Timing, Zoom1/Zoom2 is not supported.
	1) Normal
	2) Zoom1
	3) Zoom2
	4) 16:9
Position	Adjust the screen position if it is not aligned.
Digital NR	When a dotted line is displayed or the screen shakes, you can view a better visual quality
	picture by enabling Noise Reduction.
	▶ When the input signal is PC Timing, Digital NR does not operate.

Black Level You can select the signal black level according to the input signal. If it is unsuitable for the input signal, the dark parts may not be shown clearly or may be dim.

▶The Black level can only be set for the 480i and 576i RGB signals of [AV], [S-Video] and AV Timing(D-Sub)modes.

-For [AV],[S-Video] and the 480i and 576i signals of AV Timing(D-Sub).

1)0 IRE : Sets the black level to 0 IRE

2)7.5 IRE : Sets the black level to 7.5 IRE

Overscan Using this function, you can cut the edge of the picture when unnecessary information, images appear on the edge of the picture.

▶This is not supported in [AV] and [S-Video] modes.

▶This is supported only when the input signal is AV Timing(D-Sub) .

▶If Overscan is turned off, unnecessary extra parts at the edges of an image may