Toshiba VF-FS1 Holding the output of signals in on status, Input terminal function, Hdry

E6581381

(2) A signal is sent out when either of the two functions assigned is activated.

Terminal	Title	Function	Adjustment range	Default setting
symbol
RY - RC	H	Output terminal selection 1A		4 (Low-speed
			0～255	detection signal)
RY - RC	H	Output terminal selection 1B	(⇒ See page K-17)	255 (Always ON)
			0 : H and H
RY - RC	H	Output terminal logic selection		0
			1 : H or H

+Two different functions can be assigned to terminals RY-RC.

+If parameter H is set to , a signal will be sent out when either of the two functions assigned is activated.

Terminals RY-RC: Send out a signal when either of the functions set with H and H is activated.

+Timing chart

H

ON 6

OFF

H

ON

OFF

RY-RC output

ON

OFF

+Only one function can be assigned to terminals FLA-FLB-FLC at a time.

(3)Holding the output of signals in ON status

+If the conditions for activating the functions assigned to output terminals RY-RC agree with and as a result the output of signals is put in ON status, the output of signals is held ON, even if the conditions change. (Output terminal holding function)

+Assign input terminal function 62 to a contact input terminal available.

■ Input terminal function

Function No.	Code	Function	Action
		Holding of RY-RC terminal	ON: Once turned on, RY-RC is held on.
62	HDRY		OFF: The status of RY-RC changes in real
		output
			time according to conditions.

+ Once output terminal RY-RC is turned on when the contact input terminal to which one of the above functions (function 62) is assigned is ON, output terminal RY-RC is held ON.

F-11