Toshiba VF-FS1 Terminal function selection, Keeping an input terminal function always active on

E6581381

6.3Terminal function selection

6.3.1Keeping an input terminal function always active (ON)

H : Always-active function selection 1

H : Always-active function selection 2

•Function

This parameter specifies an input terminal function that is always to be kept active (ON).

[Parameter setting]

Title	Function	Adjustment range		Default setting
H	Always-active function selection 1	0-71 (⇒ See page	K-15)	0 (No function)
H	Always-active function selection 2	0-71 (⇒ See page	K-15)	1 (Standby)

* Coast stop

The standard default setting is for deceleration stop. To make a coast stop, assign a "1(ST)" terminal function to an idle terminal using the programmable terminal function.

Change to H=.

For coast stop, OFF the ST terminal when stopping the motor in the state described at left.The monitor on the inverter at this time will display QHH.

Motor	Coast stop	6
speed
F terminal		ON
		OFF
ST terminal		ON
		OFF

6.3.2Modifying input terminal functions

H : Input terminal selection 1 (F)

H : Input terminal selection 2 (R)

H : Input terminal selection 3 (RES)

H : Input terminal selection 8 (VIA)

F-5