Toshiba VF-FS1 instruction manual Communication function Common serial, Setting of common function

E6581381

6.21Communication function (Common serial)

6.21.1Setting of common function

H	: Communication rate	H	: Operation at communication
			error by disconnection
	: Parity		: Number of motor poles for
H		H
			communication

6

H : Inverter number

H : Communication error trip time

H : Communication waiting time

H : Setting of master and slave for communication between inverters

H : Communication commmand point 1 setting

H : Communication commmand point 1 frequency

H : Communication commmand point 2 setting

H : Communication commmand point 2 frequency

H : Selection of communication protocol

H : Block write data 1

H : Block write data 2

H : Block read data 1

H : Block read data 2

H : Block read data 3

H : Block read data 4

H : Block read data 5

H : Free notes

•Function

Function The VF-FS1 Series allows a data communication network to be constructed for exchanging data between a host computer or controller (referred to collectively as the computer) and the inverter by connecting an internal RS485 communication function or optional USB communication conversion unit. <Computer-linking functions>

The following functions are enabled by data communication between the computer and inverter

(1)Monitoring inverter status (such as the output frequency, current, and voltage)

(2)Sending RUN, STOP and other control commands to the inverter

(3)Reading, editing and writing inverter parameter settings

<USB communication>

Data can be exchanged between one computer and one inverter. <RS485 communication>

Data can be exchanged between the computer and each of the inverters connected.

F-78