Toshiba VF-FS1 instruction manual Table of input terminal functions, AD2

E6581381

■Table of input terminal functions 1

Function	Code	Function		Action
No.
0	-	No function is assigned	Disabled
1	ST	Standby terminal	ON: Ready for operation
			OFF: Coast stop (gate off)
2	F	Forward run command	ON: Forward run	OFF: Slowdown stop
3	R	Reverse run command	ON: Reverse run	OFF: Slowdown stop
5	AD2	Acceleration/deceleration 2 pattern selection	ON: Acceleration/deceleration 2
			OFF: Acceleration/deceleration 1 or 3
6	SS1	Preset-speed command 1	Selection of 7-speed with SS1 to SS3 (3bits)
7	SS2	Preset-speed command 2
8	SS3	Preset-speed command 3
10	RES	Reset command	ON: Acceptance of reset command
			ON → OFF: Trip reset
11	EXT	Trip stop command from external input device	ON: G Trip stop
13	DB	DC braking command	ON: DC braking
14	PID	PID control prohibited	ON: PID control prohibited
			OFF: PID control permitted
15	PWENE	Permission of parameter editing	ON: Parameter editing permitted
			OFF: Parameter editing prohibited (If H = )
16	ST+RES	Combination of standby and reset commands	ON: Simultaneous input from ST and RES
20	F+AD2	Combination of forward run and	ON: Simultaneous input from F and AD2
		acceleration/deceleration 2
21	R+AD2	Combination of reverse run and	ON: Simultaneous input from R and AD2
		acceleration/deceleration 2
22	F+SS1	Combination of forward run and preset-speed	ON: Simultaneous input from F and SS1
		command 1
23	R+SS1	Combination of reverse run and preset-speed	ON: Simultaneous input from R and SS1
		command 1
24	F+SS2	Combination of forward run and preset-speed	ON: Simultaneous input from F and SS2
		command 2
25	R+SS2	Combination of reverse run and preset-speed	ON: Simultaneous input from R and SS2
		command 2
26	F+SS3	Combination of forward run and preset-speed	ON: Simultaneous input from F and SS3
		command 3
27	R+SS3	Combination of reverse run and preset-speed	ON: Simultaneous input from R and SS3
		command 3
30	F+SS1+AD2	Combination of forward run, preset-speed	ON: Simultaneous input from F, SS1 and AD2
		command 1 and acceleration/deceleration 2
31	R+SS1+AD2	Combination of reverse run, preset-speed	ON: Simultaneous input from R, SS1 and AD2
		command 1 and acceleration/deceleration 2
32	F+SS2+AD2	Combination of forward run, preset-speed	ON: Simultaneous input from F, SS2 and AD2
		command 2 and acceleration/deceleration 2
33	R+SS2+AD2	Combination of reverse run, preset-speed	ON: Simultaneous input from R, SS2 and AD2
					11
		command 2 and acceleration/deceleration 2
34	F+SS3+AD2	Combination of forward run, preset-speed	ON: Simultaneous input from F, SS3 and AD2
		command 3 and acceleration/deceleration 2
35	R+SS3+AD2	Combination of reverse run, preset-speed	ON: Simultaneous input from R, SS3 and AD2
		command 3 and acceleration/deceleration 2
38	FCHG	Frequency command forced switching	ON: H(If H = )
			OFF: HOQF
39	VF2	No.2 Switching of V/F setting	ON: No.2 V/F setting
			(RV=0, H, H, H, H)
			OFF: No.1 V/F setting
			(Set value of RV, XN, XNX, XD, VJT)
40	MOT2	No.2 motor switching	ON: No.2 motor
		（VF2＋AD2＋OCS2）	(RV=0, H, H, H, H,
			H, H, H, H)
			OFF: No.1 motor (Set value of RV, XN, XNX,
			XD, VJT, CEE, FGE, H, H)
41	UP	Frequency UP signal input from external contacts	ON: Increase in frequency
42	DOWN	Frequency DOWN signal input from external	ON: Reduction in frequency
		contacts

K-15