Toshiba VF-FS1 Basic parameters, Switching motor characteristics via terminal input

E6581381

6.4Basic parameters 2

6.4.1Switching motor characteristics via terminal input

H : Base frequency 2

H : Base frequency voltage 2

H : Torque boost 2

H : Motor electronic-thermal protection level 2

H : Stall prevention level 2

•Function

Use the above parameters to switch the operation of two motors with a single inverter and to select motor V/F characteristics (two types) according to the particular needs or operation mode.

Note: The RV (V/F control mode selection) parameter is enabled only for motor1.

	If motor 2 is selected, V/F control will be given constant torque characteristics.			6
[Parameter setting]
Title	Function	Adjustment range	Default setting
H	Base frequency 2	25.0-200.0 (Hz)	50.0 (WP type)
			60.0 (WN type)
		50-330 (V) : 200V class	230 (WP/WN type)
H	Base frequency voltage 2		400 (WP type)
		50-660 (V) : 400V class
			460(WN type)
H	Torque boost 2	0.0-30.0 (%)	Depending on model
			(⇒ See page K-14)
H	Motor electronic-thermal	10-100 (%) / (A)	100
	protection level 2
H	Stall prevention level 2	10-110 (%) / (A),	110
		111 : Disabled

F-13