E6581381
|
| Charge lamp | |
|
|
| |
|
| Indicates that high voltage is still | |
|
| present within the inverter. Do not | |
|
| open the terminal board cover | |
1 | |||
| while this is lit. |
Front panel
The front panel of the inverter or terminal board
To avoid touching the terminal board by mistake, be sure to close the front panel before starting operation.
Unlock position mark
The front panel is unlocked when the dot on the locking screw is on this (upper) side.
Front panel locking screw
The inverter came with this screw in the locked position. So from this position, turn the screw 90° counterclockwise to unlock the front panel, or turn it 90° clockwise to lock the front panel.
The screw does not turn 360°. To avoid damage to the screw, do not use excessive force when turning it.
Lock position mark
The front panel is locked when the dot on the locking screw is on this (lower) side.
[Front]
Communicatio Connector hole | Top warning label Note) | |
Colling fin | ||
|
Ventilation slit
Cnotrol cable port
Main circuit cable port
Name plate
[Bottom] | [Right side] |
Note: Remove this seal and operate it at a current lower than the rated one when installing the inverter side by side with other inverters where the ambient temperature will rise above 40°C.
