Basic Settings | Connecting the Power | Connecting with a PC | Connecting with an AV device |
Installing a Projector
Install the projector so that the beam from the projector is perpendicular to the screen.
Place the projector so that the lens is at the center of the screen.
If the screen is not vertically installed, the picture on the screen may not be a rectangle.
Do not install the screen in a bright surrounding. If the screen is too bright, the picture on the screen is not displayed clearly.
When installing the screen in a bright surrounding, use curtains or blinds to darken the surroundings. 
You can install the projector to the front floor / front ceiling / rear floor / rear ceiling.
(To view the installation position settings)
To view the picture when installing the projector to the rear of the screen,
install a
Select Menu > Setup > Install > Rear-Floor
To view the picture when installing the projector to the front of the screen,
install the projector at the side where you are watching the screen.
Select Menu > Setup > Install > Front-Floor
Focusing
Turn the Focus Ring left or right until the picture on the screen is displayed clearly.
If the distance between the projector and the screen is farther or shorter than the specified projection distance (Refer to the Screen Size and Projection Distance), the focus adjustment might fail.
