English _31
LIVE

Switching to Single Mode

When in split mode, select and double-click a desired channel to switch to its Single mode.
Press the number corresponding to a desired channel on the front panel or the remote control to switch to its
Single mode.
Refer to “Remote Control > Using the numeric buttons”. (Page 13)
Ex : If double-clicking CH 3 or pressing the number “3” on the remote control or the front panel.
SPOT OUT
The Spot Out monitoring is independent of the Live mode, which monitors a specific channel through the Spot Out
port.

Selecting a Spot Out mode

If an event occurs such as sensor, motion or alarm from the Spot Out port in connection with a monitor, you
can select a output screen mode.
In Live mode, right-click any area on the screen.
The Live menu appears.
Click Spot Out.
The split screen appears according to the Spot Out source.
(Page 51)
Spot Out 1 : Supports 16-, 9-, 4-split, Auto Sequence and Single
modes.
Spot Out 2, 3, 4 : Supports 4-split, Auto Sequence and Single
modes.
The number of Spot Out terminals differs according to the model.
For the Spot Out port of a model, refer to “Part Names and
Functions (Rear)”. (Page 10)
1.
2.
CH1 CH2 CH3 CH4
CH5 CH6 CH7 CH8
CH9 CH10 CH11 CH12
CH13 CH14 CH15 CH16 CH3
Spot Out 1 f
Spot Out 2 f
Spot Out 3 f
Spot Out 4 f
Scene Mode f
Spot Out f
Audio Off
Freeze
Stop Alarm
Record
Play
Search
Backup
Main Menu
Shutdown
Hide Launcher
Logout
16-split
9-split
4-split
Auto Sequence
Single f
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
< Multichannel Live Menu >