44_ using the DVR
VTJOHUIF%73
SETTING THE DEVICE
You can setup Camera, Storage Device, Remote Device, POS Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.
Using the mouse may help make setup easier.
Press the [MENU] button on the remote control or front
panel.
Use the left/right button (
◄ ►
) to select <Device>.
Device setting menu is selected.
Use the up/down buttons (

) to move to <Camera>,
and press [ENTER] button.
Select <Camera>.
You will see a window where you can configure the
camera settings including Video, Audio, Channel Name,
Dwell Time and Progressive.
Use direction buttons (
◄ ►
) to move to a desired
item, and set the value.
Video
-<ON/OFF> : You can turn ON/OFF the selected
channel’s camera.
-<Covert1> : Shows information other than the video of the selected channel.
For privacy protection, it does not display the video while the recording continues.
-<Covert2> : Shows nothing but an empty screen while the recording continues.
No signal will be output from channels that are set to <Covert1> or <Covert2> for the video.
However, audio recording will be performed for a channel whose audio is set to <ON> even if no audio signal is
output from the Live screen.
Audio
- If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.
- If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.
Audio output is available for only 1 channel.
SRD-830DC/1610DC/1630DC supports 1~4 channels of sound inputs.
1.
2.
3.
4.
5.
•
M
•
M
Device
Logout Exit
Camera
Storage Device
Remote Device
POS Device
Monitor
CH Video bAudio bCH Name SEQ-Dwell Time bProgressive b
1ON
bOFFbCAM 01 5 sec b OFF b
2ON
bOFFbCAM 02 5 sec b OFF b
3ON
bOFFbCAM 03 5 sec b OFF b
4ON
bOFFbCAM 04 5 sec b OFF b
5ON
bOFFbCAM 05 5 sec b OFF b
6ON
bOFFbCAM 06 5 sec b OFF b
7ON
bOFFbCAM 07 5 sec b OFF b
8ON
bOFFbCAM 08 5 sec b OFF b
Camera
Camera PTZ
Previous/Next Page
Screen Setup
OK Cancel