English _55
USING THE DVR
Disk End Mode : If selected <Overwrite>, recording will continue despite the HDD full while overwriting the
oldest.
If selected <Stop>, the recording will stop when the HDD is full.
Disk End Beep : If selected <Stop>, the button is activated.
If you check it, the beep will sound on the disk full and the recording stops.
Auto Delete : If you check it, Record Period setup is activated.
If you setup the auto delete, recorded data only in the configured period are searchable.
When the recording option setup is done, press <OK>.
SETTING THE EVENT
You can set recording options for sensor, motion, and video loss event.

Sensor Detection

You can set the sensor’s operating condition and connected camera, as well as alarm output and its duration.
Using the mouse may help make setup easier.
Press the [MENU] button on the remote control or front
panel.
Use the left/right button (
◄ ►
) to select <Event>.
Event setting menu is selected.
Use the up/down buttons (

) to move to <Sensor
Detection>, and press [ENTER] button.
A window of sensor detection setup appears.
Use direction buttons (
◄ ►
) to move to a desired
item, and set the value.
Sensor Operation : Sets the operation mode of sensors.
-<OFF> : Sensor does not operate.
-<N.O (Normal Open)> : Sensor is opened.
If the sensor is closed, it generates alarm.
-<N.C (Normal Close)> : Sensor is closed.
If the sensor is open by interruption, it generates alarm.
Cam : Select a channel to be connected to the sensor.
If selected camera, “Cam Preset setup” window appears.
Select a channel and setup the preset.
Preset setup can be done in PTZ mode.
•
•
•
5.
1.
2.
3.
4.
•
•
Event
Logout Exit
Sensor Detection
Motion Detection
Video Loss Detection
Alarm Schedule
Sensor Detection
OK Cancel
Previous/Next Page
Sensor
Sensor Operation bCam bAlarm bDuration b
1 OFF b1 None 10 sec b
2 OFF b2 None 10 sec b
3 OFF b3 None 10 sec b
4 OFF b4 None 10 sec b
5 OFF b5 None 10 sec b
6 OFF b6 None 10 sec b
7 OFF b7 None 10 sec b
8 OFF b8 None 10 sec b
Sensor Detection
OK Cancel
Previous/Next Page
Sensor
Sensor Operation bCam bAlarm bDuration b
1 OFF b1 None 10 sec b
2 OFF b2 None 10 sec b
3 OFF b3 None 10 sec b
4 OFF b4 None 10 sec b
5 OFF b5 None 10 sec b
6 OFF b6 None 10 sec b
7 OFF b7 None 10 sec b
8 OFF b8 None 10 sec b
Cam Preset setup
OK Cancel
CH
bPreset
1 None b
2 None b
3 None b
4 None b
5 None b
6 None b
7 None b
8 None b
CH
bPreset
9 None b
10 None b
11 None b
12 None b
13 None b
14 None b
15 None b
16 None b