Samsung SRP-270 specifications Epson TM-300/U200 Hexadecimal Dump

Epson TM-300/U200 Hexadecimal Dump

It may be useful to compare hexadecimal dumps with a known printer, such as the Epson TM-

300 or U200. To print a hexadecimal dump on the TM-300/U200:

1.Make sure the printer is off and set dip switch 1-2 to ON.

2.Hold down the PAPER FEED button while you turn on the printer, and then release the PAPER FEED button quickly.

Note: Releasing and pressing the PAPER FEED button should be performed before the printer finishes initializing, otherwise the printer begins the self test.

3.When the printer enters the hex dump mode, it prints “Hexadecimal Dump”.

4.Run any program the sends data to the printer – the hexadecimal dump will print.

5.When the printing finishes, turn off the printer or reset it to turn off the hex dump mode.

6.If you changed the dip switch 1-2, return it to the OFF position.

8 ∙ Hexadecimal Dumping Samsung SRP-270 Setup & Service Information