Rev. 1.01 - 19 -
SRP-350II
4. Specification
Printing method Thermal line printing
Dot density 180 dpi (7dots/mm)
Printing width 72 mm
Paper width 80 mm
Characters per line (default)
42 (Font A)
56 (Font B)
56 (Font C)
Printing speed 47.28lines/sec , 200 mm/sec
Receive Buffer Size 4K Bytes
NOTE : Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
SMPS Input voltage 100~240 VAC
Frequency 50/60 Hz
Supply voltage
SMPS Output voltage 24 VDC
Temperature 0 ~ 45 (Operating)
-20 ~ 60 (Storage)
Environmental
Conditions Humidity
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
Mechanism Head
150 Km
LIFE *
Auto Cutter 1,800,000 Cut
MCBF * Mechanism 70,000,000 lines
* These values are calculated under printing level 2 with recommended paper at normal
temperature.
* These values may vary with environment temperature, printing level, etc.
* The switch is the disconnecting device. Turn off switch from any hazard.