Samsung SSC-2000 Chapter 5. MENU setup

1. Press the “CH” ICON below on the MUX screen.

2. Achannel selection screen will appear as shown below.

3. Select the channel you want.

4. Press the EXITICON on the lower right to finish selecting and

return to the MUX control screen

Press the setup icon on the lower left to control the menu of the

selected MUX.

Using the direction key and the enter key, control the MUX MENU.

You can use the joystick as a direction or enter key by moving it or

using the AF button.

Press the EXITICON to finish controlling the MUX MENU.

Chapter 5. MENU setup

Press the menu button of the keyboard and a log-in window will

appear as follows.

Using the number keys, enter the correct Operator No. and Password.

MAIN MENU will be displayed on the screen when you complete

the log-in process.

Press the item you want to control on the main menu.

Press the EXITICON in the main menu to return to the camera con-

trol mode.

• If the CHECK PASSWORD item is set “Off” in the keyboard setup, press

the “MENU” button. MAIN MENU screen will directly appear without the

log-in process.

• If you press the menu button while the OPERATOR's LEVELis the

MANAGER’s or OPERATOR's level, there will be a short alarm and you

cannot go into the menu.

On MAIN MENU, press “KEYBOARD SETUP” to call the

KEYBOARD SETUPscreen.

The KEYBOARD SETUPmenu are constituted by 8 main items as

follows.

On the KEYBOARD SETUPmenu, press “RS-485 COMMUNICA-

TION SETUP” and the RS-485 COMMUNICATION SETUPmenu

will appear on the screen.

• The default address of the keyboard is 0.

• The default BAUD RATE of the keyboard is 9600BPS.

• The factory default setting of duplex of keyboard is HALF DUPLEX.

GB-12