4-2. Monitor
Monitor Controls - Front Panel
① Monitor ON/OFF and Alarm Reset
MONITOR ON/OFF
In the monitor screen OFF mode, the monitor switches to the power save mode outputting only the VCR OUT signal.
✳ When an alarm occurs, while in the power save mode, Monitor screen turns on automatically.
At this time, if the Monitor ON/OFF key is pressed, the Alarm will be cancelled.
However,the Monitor screen will not be turned off.
ALARM RESET
This key enables the cancellation of all Alarms, after one or more alarms have been detected.
(Clears the alarm and turns off the buzzer)
②VOLUME
Enables the control of audio output volume.
It is possible to control the volume output while in Quad, Single, Auto Switcher, PIP, and VCR Modes. (Except in the case of Alarm and Zoom modes)
Enter the volume mode by pressing the VOLUME key, then use the ▲ ▼ keys to control the output volume.
To exit the volume mode, press the VOLUME key again.
✳While in the volume mode, if no keys are pressed for 5 seconds, the volume mode will be cancelled.
24
