1.1. Warning Symbols
Chapter1. SafetyWarnings

1.1. Warn ingSy mbols

Warning
Misuseorwrongfuloperationoftheitemmayresultindeath,injury,orbringabout
otherharmfulresults.Itindicatesabsolutecautionmustbeobservedwhenoperating
saiditem.
BeforeInstallation
9 Please check the power outlet voltage (AC 100V~240V) before you connect the
power to the outlet.
9 Make sure that the product is switched off before you install it.
9 To avoid the risk of electric shock and/or fire, do not install the product in a damp area.
9 The product must be grounded to reduce the risk of electric shock.
UsingtheProduct
9 Opening or removing the product case will expose you to the risk of electric shock; do
not open or remove the case unless you are a qualified technician.
9 To prevent electrical fire, do not connect multiple power cords to a single outlet.
9 Do not place heavy objects or vessels containing water on the unit since it can cause
serious malfunctions.
9 Do not use this item in a location containing propane gas, gasoline, or other
flammable substances to avoid risk of explosion or fire.
9 To avoid the risk of electric shock, do not touch the power plug with moisture on your
hands.
9 Do not insert your hand or finger to the DVD slot; it may cause injury.
9 Make sure that no electrically conductive material enters the cooling vent.
9 Do not pull on the power plug with any force; a damaged plug may cause electric
shock or fire.
9 To avoid the risk of an explosion, the internal Lithium battery must be replaced only
with an identical, or a fully compatible, product. Obsolete batteries must be properly
retired or recycled to protect the environment.
9 Do not expose the battery to heat or place it in fire; short-circuiting or disassembling
the battery is also hazardous.
9 Do not recharge the batteries in the remote controller.
7