Samsung SW55USP user manual Assembling the RAT Protection Panel, HOW to Connect the Drain Hose

installation & maintenance

ASSEMBLING THE RAT PROTECTION PANEL

Tilt the washer a little and lift up the panel until it clicks, finally fix the panel with screw to the base as shown in the figure.

Rear-side

1.Insert the rat protection panel to the assembling hole on back side to the end.

2.If you have difficulty inserting the panel lift up the washer a little and insert it.

HOW TO CONNECT THE DRAIN HOSE

IN CASE OF PUMP-DRAINED WASHER

cap-hose

Take out the cap-hose and connect the	Be sure to join tightly the drain hose into the
outlet-hose.	drainoutlet on the back of the machine.
	90~100cm
Be sure to join tightly the drain hose into the	Install the drain hose in the position of about
drain-outlet on the side of the machine.	90~100cm above the ground.

18_Installation & maintenance

SW55USPIW-02445K_EN(ÀÓ½Ã).indd 18

2009-05-28 ¿ÀÈÄ 4:29:01