Heat & Glo LifeStyle CRESCENT II Appliance Setup, A. Remove Shipping Materials, C. Accessories

12 Appliance Setup

A. Remove Shipping Materials

Remove shipping materials from inside and underneath the firebox. A shipping bracket on the bottom front face must be removed. Remove the screws and shipping bracket and discard (see Figure 12.1).

SHIPPING

BRACKET

REMOVE (4) NUTS

AND SHIPPING BRACKET

Figure 12.1

B. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity.

C. Accessories

Install approved accessories per instructions included with accessories. See Service Parts List for appropriate accessories. Refer to Section 16.

WARNING

Shock or fire risk.

Use ONLY optional accessories approved for this appliance.

•Using non-listed accessories voids warranty.

•Using non-listed accessories may result in a safety hazard.

•Only Hearth & Home Technologies approved

accessories may be used safely.

34 Heat & Glo • Crescent II • 2083-902 Rev. N • 7/09