installation & maintenance
ASSEMBLING THE RAT PROTECTION PANEL
1.It is easier engaging the shutter when the set is lifted up a little, as shown in the figure below.
2.Insert the shutter completely through the engagement hole from the back.
HOW TO CONNECT THE DRAIN HOSE
IN CASE OF PUMP-DRAINED WASHER
•Attach the drain hose to the rear of the washer.
Install the clamp on the drain hose and tighten to prevent
leakage of water.
• Install the drain hose in the position of about 90~100cm |
|
above the ground. | 90~100cm |
|
18_Installation & maintenance
