YO U R NE W DI G I TA L TV

Rear Panel Jacks

Use the rear panel jacks to connect an A/V component that will be connected continu- ously, such as a VCR or a DVD player.

Your TV has several input jacks, so you can connect different A/V components simultaneously (i.e., a VCR and a DVD, 2 VCRs, etc.).

For more information on connecting equipment, see page 14~24.

ŒDVI (Digital Visual Interface) AUDIO INPUT jacks

Receives the digital audio signals from AV devices.

´AUDIO-VIDEO MONITOR OUTPUT jacks

Connect to the audio/video input jacks of a record- ing VCR.

ˇÔ AUDIO INPUT1, 2, 3 jacks

Connect to the audio output jacks of VCRs, DVD players and similar devices.

¨ VIDEO INPUT1, 2, 3 jacks

ØS-VIDEO INPUT jack

Connect to S-VIDEO output jacks of an S-VHS VCR or DVD player.

Note: In S-Video mode, Audio Output depends what kind of audio input source is connected to the side audio input jacks (AV1).

∏UPGRADE PORT

For service only.

”OPTICAL OUTPUT jack

Connect to a Digital Audio component.

’ANTENNA terminals

Connect to the video output jacks of VCRs, DVD players and similar devices (Three sets are available: Video1, Video2 and Video3).

ˆDIGITAL VIDEO INPUT (Digital Visual Interface) jack

Receives the digital signals from a Set-top Box.

Two independent cables or antennas can be connected to these terminals. Use ANT A and ANT B terminals to receive a signal from VHF/UHF antennas or your cable system.

˝COMPONENT1, 2

(480i, 480p, 720p, 1080i) AUDIO/VIDEO INPUT jacks

Connect to the Audio & Video outputs of DVD or DTV Set-Top-Box.

11