IN S TA L L AT I O N

Cable with a Cable box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled “ANT OUT”, “VHF OUT”, or sim- ply, “OUT”.

2

Connect the other end of this cable to the ANT A or ANT B terminal on the rear of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN termi- nal on your cable box.

2

Connect this cable to a two-way splitter.

▼

This terminal might be labeled

“ANT IN,” “VHF IN,” or simply, “IN.”

3

Connect a coaxial cable

between an OUTPUT terminal on the splitter and

the IN terminal on the cable box.

16