Samsung TX-R2734 manual Incoming Cable Splitter

I N S TA L L AT I O N

4

Connect a coaxial cable between the ANTENNA OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.

Incoming

Cable

Splitter		RF (A/B)
	Cable Box	Switch

5

Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.

Incoming

Cable

Splitter		RF (A/B)
	Cable Box	Switch

6

Connect the last coaxial cable between the OUT terminal on the RF (A/B) switch and the VHF/UHF terminal on the rear of the TV.

Incoming

Cable

Splitter		RF (A/B)	TV Rear
	Cable Box	Switch

After you’ve made this connection, set the A/B switch to the “A” position for normal view- ing. Set the A/B switch to the “B” position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.)

14