Samsung TX-T2042X, TX-T2041X Setup - Plug & Play, Channel - Memorizing the Channels, continued

Setup - Plug & Play

When the TV is initially powered on, several basic customer settings proceed automatically and subsequently.

The following settings are available.

6 When you have finished,

press the MENU button.

The “Enjoy your watching.” is

displayed.

Enjoy your watching.

Channel - Memorizing the Channels

Your TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH and CH buttons to scan through the channels.

1Press the POWER button on the remote control.

The “Start Plug & Play” is displayed. Press the ENTER button, then the “Language” is displayed.

2Press the ▲ or ▼ button to select the desired language, then press the ENTER button. The “Check antenna input.” is displayed.

Plug & Play

Start Plug & Play

OK

Enter Return

Plug & Play

Language

English

Español

Português

Français

Move Enter Skip

➢ Plug & Play feature

doesn’t work in the AV

mode.

Re-setting the Plug & Play

Method:

MENU  ▲/▼ (Setup)  ENTER  ▲/▼ (Plug & Play)

ENTER

OK

			Setup
Plug & Play		: English	►
Language			►
Time			►
Caption			►
V-Chip		: Off	►
Blue Screen			►
Melody		: On	►
Demonstration			►
Move	Enter		Return

This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: “Air/Cable”, “Auto Program” and “Add/Delete”.

 Air/Cable
				Channel
Before your TV can begin		Air/Cable		Air
memorizing the available		Auto Program		STD
		Add/Delete		HRC
channels, you must specify		Fine Tune		IRC
the type of signal source		Name
that is connected to the TV
(i.e., an antenna or a cable	Move		Enter	Return
system).

Select “Air”, “STD”, “HRC”, or “IRC” by pressing the ▲ or ▼ button.

3 Make sure that the antenna
is connected to the TV.	Plug & Play
Press the ENTER button,
	Check antenna input.
then the “Auto Program” is	OK
displayed.	Enter	Skip

 Auto Program

All available channels are

automatically stored in

memory when channels are

selected by the direct tuning

function.

Press the ENTER button

Search

Air 3

3%

Stop

Enter Return

4 Press the ENTER button

Plug & Play

Input - Source List / Edit Name

at any time to interrupt the

memorization process.

to start. The TV begins

memorizing all available

channels. Press the ENTER

button to stop.

Auto Program

Air 3

	3%
	Stop
Enter	Skip

Source List

You can switch between viewing signal from connected equipment, such as a VCR, DVD, set-top box, and the TV source (broadcast or cable).

			Source List
	TV		----
	AV1
	AV2		----
	Component		----
Move		Enter	Return

 Add/Delete

You can add or delete

a channel to display the

channels you want only.

To use the “Add/Delete”

function, first run Auto

	Add/Delete
▲ More	: Deleted
2
3	: Added
4	: Deleted
5	: Deleted
6	: Deleted
▼ More

5 After all available channels

are stored, the “Clock Set” is

displayed.

Press the ◄ or ► button to

Plug & Play
Clock Set	-- : -- am

➢Press the SOURCE button on the remote control repeatedly to select the desired signal source.

Program.

Select “Deleted” or “Added”

by pressing the ▲ or ▼

button.

Move Enter Return

move to the hour or minute.

Set the clock by pressing the

▲ or ▼ button.

Move	Enter
	Skip

Edit Name

You can give a name to the external source.

			Edit Name
	AV1		----
	AV2		VCR
	Component		DVD
			Cable STB
			Sat. STB
			AV Receiver
			DVD Receiver
			▼
Move		Enter	Return

continued...

English - 3