Sound -
Mode / Equalizer / MTS / Auto Volume /
Pseudo Stereo /Turbo Plus
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, then call your nearest Samsung authorized service center.
The TV won’t turn on.
| Make sure the wall outlet is working. |
| Make sure the TV is plugged in. |
Mode: Standard/Music/ Movie/Speech/Custom You can select the type of special sound effect to be used when watching a given broadcast.
|
|
|
| Sound |
| Mode | : Custom | ► | |
| Equalizer |
|
| ► |
| MTS | : Stereo | ► | |
| Auto Volume | : Off | ► | |
| Pseudo Stereo | : Off | ► | |
| Turbo Plus |
| : Off | ► |
Move | Enter |
| Return | |
Poor picture.
Try another channel.
Adjust the antenna.
Check all wire connections.
Poor sound quality.
Make sure the remote has batteries. |
Remote control malfunctions
Replace the remote control batteries. |
Clean the upper edge of the remote control (transmission |
window). |
Check that the “+” and |
Equalizer
The TV has several settings which allow you to control the sound quality.
➢If you make any changes to these settings, the sound mode is automatically switched to “Custom”.
MTS
Depending on the particular program being broadcast, you can listen to Mono, Stereo, or SAP.
➢Press the MTS button on the remote control repeatedly to select “Stereo”, “Mono”, or “SAP” (Secondary Audio Program).
Auto Volume
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Pseudo Stereo
This feature converts a monaural sound signal into two identical left and right channels. Once the “Pseudo Stereo” is set to “On” or “Off”, the setting applies to the sound effects such as “Standard”, “Music”, “Movie” and “Speech”.
Turbo Plus
This feature emphasizes the bass and treble frequencies to add fullness to the sound.
Try another channel.
Adjust the antenna.
No picture or sound.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
Make sure the MUTE button is off.
No color, wrong colors or tints.
Make sure the program is broadcast in color.
Adjust the picture settings.
Picture rolls vertically.
Adjust the antenna.
Check all wire connections.
If you are using a VCR, check the tracking.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
Your remote control does not operate your TV.
Make sure the remote has batteries.
Check that the “+” and
Check that the batteries are drained.
continued...
inserted correctly. |
Check that the batteries are drained. |
English - 7
