15
INSTALLATION
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Note: Only 480i formats are supported.
Note: For an explanation of Component video, see your DVD player's owner's manual.
1
Connect a set of audio
cables between the
AUDIOINPUT 2 jacks on
the TV and the AUDIO
OUT jacks on the DVD
player.
2
Connect a video cable
between the COMPO-
NENT INPUT (Y, Pb, Pr)
jacks on the TV and the
DVD-OUT (Y, Pb, Pr) jacks
on the DVD player.
Connecting a Second VCR to Record from the TV
(Depends on the model)
Your TV can send out signals of its picture and sound to be recorded by a second VCR.
To do this, connect your second VCR as follows:
1
Connect a set of audio
cables between the
AUDIOOUT jacks on the
TV and the AUDIO IN
jacks on the VCR.
2
Connect a video cable
between the VIDEOOUT
jack on the TVand the
VIDEOIN jack on the VCR.
Refer to your VCR’s instructions for more information about how to record using this kind
of connection.
Note: This figure shows the Standard connector-jack panel. The actual configuration for your TV
may be different.
(The VCR input jacks might be either on the front or on back of the VCR.)
VCR Input Panel
TV Rear Panel
Audio Cable
VCR Input Panel
TV Rear Panel
Video Cable
DVD Player Rear Panel
TV Rear Panel
Video Cable
DVD Player Rear Panel TV Rear Panel
Audio Cable