I N S TA L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is connected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the “ANT 2 IN (Cable)” terminal on the rear panel.

œThis terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

œThis terminal might be labeled “ANT IN”, “VHF IN” or simply, “IN”.

2

Connect this cable to a two-way splitter.

Incoming Cable

Splitter

3

 

Connect a coaxial cable

 

between an OUTPUT

Incoming Cable

terminal on the splitter

 

and the IN terminal on the

Splitter

cable box.

Cable Box

continued...

English - 16

Page 16
Image 16
Samsung TX R2779H manual Connecting to a Cable Box that Descrambles All Channels