I N S TA L L AT I O N
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 14~17).
TV Rear Panel
1
Connect a coaxial cable between the “ANT 1 IN (Air)” terminal on the TV and the antenna out terminal on the VCR.
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
2
Connect a set of audio cables between the “AV IN 1 (L, R)” (or “AV IN 2/3 (L, R)”) jacks on the TV and AUDIO OUT jacks on the VCR.
If you have a mono VCR, connect L(mono) to VCR audio out using only one audio cable.
3
Connect a video cable between the “AV IN 1 (VIDEO)” (or “AV IN 2/3 (VIDEO)”) jack on the TV and the VIDEO OUT jack on the VCR.
Refer to your VCR’s instructions for more information about how to view your VCR tape.
• Also, you can connect to “AV IN 4” on the side panel of TV.
