Samsung TX S2782H, TX S3082WH, TX-S2779H manual Connecting a VCR, Connecting an S-VHS VCR

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 8~9). Skip step 1 if you have not yet connected to an antenna or a cable system.

VCR Rear Panel

2

TV Rear Panel

5Audio Cable (Not supplied) 4 Video Cable (Not supplied)

1.	Unplug the cable or
	antenna from the back of
	the TV.
2.	Connect the cable or
	antenna to the ANT IN
	terminal on the back of the
	VCR.
3.	Connect an Antenna cable
	between the ANT OUT
	terminal on the VCR and
	the ANT 1 IN (AIR) or ANT
	2 IN (CABLE) terminal on
	the TV.
4.	Connect a Video Cable
	between the VIDEO OUT
	jack on the VCR and the
	AV IN 1 [VIDEO] jack on
	the TV.

3Antenna cable (Not supplied)

➢Each external input source device has a different back panel configuration.

➢When connecting an external device, match the color of the connection terminal to the cable.

➢Also, you can connect to “AV IN 2” on the side panel of TV.

5. Connect Audio Cables

between the AUDIO OUT

jacks on the VCR and the

AV IN 1 [L-AUDIO-R]

jacks on the TV.

➢ If you have a “mono”

(non-stereo) VCR, use a

Y-connector (not supplied)

to hook up to the right and

left audio input jacks of

the TV. If your VCR is

stereo, you must connect

two cables.

Connecting an S-VHS VCR

Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)

TV Side Panel TV Rear Panel

VCR Rear Panel

3 Audio Cable (Not supplied)

2 S-Video Cable (Not supplied)

1 Antenna cable (Not supplied)

An S-Video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)

➢Each external input source device has a different back panel configuration.

➢When connecting an external device, match the color of the connection terminal to the cable.

➢Some games may be displayed with a cut off picture when the TV is connected to a game player.

1.To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.

2.Connect an S-Video Cable between the S-VIDEO OUT jack on the VCR and the AV IN2 [S-VIDEO] jack on the TV.

3.Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN2 [L-AUDIO-R] jacks on the TV.

English-10