Samsung TXK 3676, TXL 3276, TXL 3676 Memorizing the Channels, Selecting the Video Signal-source

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH ▲ and CH ▼ buttons to scan through the channels. This eliminates the need to change chan- nels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press MENU to display the menu.

2

Press CH ▼ two times to select “Channel.”

3

Press VOL +.

The first line of the menu is selected.

4

Repeatedly press VOL + to cycle through these choices:

ANT (antenna) STD, HRC or IRC (all cable TV).

Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to “Storing

Channels in Memory” (next page).

3.5 CHAPTER THREE: TV OPERATION