Samsung TXM 1491F manual Connecting a VCR, Unplug the cable or antenna from the back of the TV

Models: TXM 1491F

1 52
Download 52 pages 21.15 Kb
Page 16
Image 16

I N S T A L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.4). Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

3

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

2.5 CHAPTER TWO: INSTALLATION

Page 16
Image 16
Samsung TXM 1491F manual Connecting a VCR, Unplug the cable or antenna from the back of the TV